 |
Liquid Glass® Polish/Finish
Liquid Glass. The Ultimate
Polish/Finish.
The Car Collector's and Customer's Choice.
This amazing special formula makes it possible to
coat your vehicle with a clear, hard, smooth, and mirror-like finish
with a minimum of effort. The finish will not crack, chip, peel, or turn
yellow. Liquid Glass is safe for use on today's clearcoats, gelcoats,
acrylics, metalflakes, candy apples, pearls, plastic paints, epoxies,
urethanes, etc. Also does an excellent job on chrome, aluminum,
stainless steel, brass, etc.
Use on automobiles, trucks, vans, RV's,
motorcycles, and other vehicles. Provides excellent protection against
normal road, atmospheric, and other sources of pollution, dirt, etc.
Retards oxidation of painted metals and fiberglass. Also use on aircraft
to protect, keep clean, and reduce surface friction. It also has
hundreds of uses in and around the home, (for example, Formica, ceramic
tile, jewelry, glass, sporting and camping equipment, etc.) |
Liquid Glass Auto Polish/Finish
Application Instructions
Before using, shake can well! The surface must be clean
and dry. All wax residue on vehicles should be removed. We recommend the
use of Liquid Glass Pre-Cleaner. Our Pre- Cleaner will ensure optimum
results by prepping/cleaning dull, stained, oxidized, or previously
waxed surfaces, thus enabling the Liquid Glass Polish/Finish to adhere
better to the applied surface.
Apply Liquid Glass sparingly, but evenly, using a coarse cotton cloth
in a straight back and forth movement. Apply one section at a time. The
ideal applied surface temperature should be between 50 and 80 degrees.
(If any paint color appears on the cloth, it is oxidized paint that must
be removed to reveal the good paint layer beneath.) After a haze appears
on the surface, wipe off with a clean, dry cloth. Terry cloth or Turkish
towel may be used.
For best results, allow at least four hours between coats to permit
"curing." When finished, "baking" vehicle in the sun
will bond Liquid Glass Polish/Finish to the surface. The greater the
number of coats, the greater the protection afforded. Liquid Glass Wash
Concentrate can be used to remove debris and refreshen between coats.
Occasionally on dark colored vehicles, streaking may occur.
Temperature, previously used wax products, and buffing cloths are all
things that can affect streaking. Streaks can be eliminated by rebuffing
the surface with a damp cloth.
Liquid Glass Polish/Finish can be applied to any nonporous surface
including aluminum, stainless steel, brass, glass, ceramic tile, etc.
There are thousands of uses for business or in the home. Caution
should be used, however, since a long-lasting slippery finish can be
dangerous in places (for example, bath tub or shower floor). Do not use
on porous surfaces such as fabrics, upholstery, leather, vinyl, etc.
FOR REPAINTING ONLY: Liquid Glass may be removed by first
washing with a strong solution of high quality car wash detergent, then
using 00 steel wool with mineral spirits or Varsol. (This same procedure
should be used to remove any wax product from a vehicle
before repainting.) Wipe dry and sand with desired grade of sandpaper
before repainting.
CLICK on the product name that you
would like to view more information
about.
Liquid Glass® Polish/Finish
Liquid Glass® Pre-Cleaner
Connoisseur's Choice®
Leather, Vinyl & Rubber Protectant
Connoisseur's Choice®
Leather, Vinyl & Rubber Cleaner
Liquid Glass® Wash
Concentrate
Nautical Liquid Glass® (not
shown above)
|
